Scansonic MB5B floor-standing speakers

The MB5 cabinet is heavy braced, curved and with solid carbon reinforcements. The speaker is crossed over at 2600 Hz and the two added side woofers assist up to 250 Hz.

SKU: N/A Categories: , Tag:

Description

Description
Size, mm. (BxHxD): 178 x 1185 x 319
Weight, kg.: 24
Freq. response: 29 Hz – 40 KHz
Impedance: > 4 ohm
Sensitivity: 90 db
Crossover: 250 Hz + 2600 Hz / Minimum phase
Enclosure: Curved, heavily braced, ventilated box design with adjustable aluminum feet
Drive units: 1 x Ribbon tweeter · 1 x 5,25” Midrange · 3 x 5,25″ Woofer
Black-silk, White-silk or Walnut
Amplification: We recommend high quality amplifiers >50W

Additional information

Brand

ScansonicHD

Internal Variant ID

!ID:75830783

Color

Black, White, Walnut

Brand

ScansonicHD

Having worked with Raidho speakers for more than 12 years, we found ourselves faced with a completely new challenge when we was asked to design a new range of high-performance speakers for the Scansonic brand. From the start, we were very focused on building on all the experiences and strengths obtained from designing the Raidho speakers. At the same time, we also had to be aware of the long heritage and the Nordic design tradition of the Scansonic brand. This time, the task also came with a budget and a desire to create the very best possible within financial limits. It was clear to us from the very beginning, that some core techniques from the Raidho speakers would be of importance: The speakers had to be designed around a ribbon tweeter that works with at super lightweight diaphragm that is sealed around the edges to allow for a seamless transition to the midrange region. Furthermore, they needed to be designed and developed with a speaker driver with a ridged, pistonic-type membrane, that could keep up with the ribbon tweeter. Weight loss for resolution transients &  superb leading edges The MB ribbon tweeter has a membrane with an extremely low mass. It is formed by a Kapton-aluminum sandwich that is only 20 um thick, and the resulting mass is app. 0.03 g., which is approximately 50 times less than any conventional textile, ceramic, beryllium or diamond dome. The lower mass translates directly into higher resolution and less sound coloration. Weaved carbon cones for stiffness & low compression For the MB-series, we have developed a ridged, dust cap free, carbon membrane. By carefully optimizing the shape and stiffness, we have succeeded in making a very well performing woofer that blends beautifully with the ribbon tweeter. The woofer has an overhung magnet system, with long linear stroke and excellent bass performance.